Please use this identifier to cite or link to this item:
https://ric.cps.sp.gov.br/handle/123456789/35603
Title: | Soldabilidade em aço DOMEX 700MC material de alta resistência e baixa liga |
Other Titles: | Weldability in DOMEX 700MC steel high strength and low alloy material |
Authors: | OLIVEIRA, Daniel Batista de NEVES, Marcelo Morelli |
Advisor: | VENTURA JÚNIOR, Antônio Carlos Muniz |
type of document: | Artigo Científico |
Keywords: | Mecânica;Transporte;Aço;Soldagem |
Issue Date: | 2021 |
Publisher: | 176 |
Citation: | OLIVEIRA, Daniel Batista de; NEVES, Marcelo Morelli. Soldabilidade em aço DOMEX 700MC material de alta resistência e baixa liga. 2021. Artigo Científico (Curso Superior de Tecnologia em Mecânica: Processos de Soldagem) - Faculdade de Tecnologia de Sertãozinho "Dep. Waldyr Alceu Trigo", Sertãozinho, 2021. |
Abstract: | O objetivo deste trabalho é analisar a soldabilidade do aço DOMEX 700MPa, com a utilização do consumível ER70S-6 através do processo GMAW, utilizados na fabricação de chassis de caminhões e reboques. A análise foi realizada através dos ensaios mecânicos feitos por corpos de prova em laboratório, por meio de ensaios de tração, dobramento e micro dureza. Nos resultados analisados, verificou-se que a resistência mecânica e a micro dureza do metal de adição ER70S-6 é inferior à do metal de base Aço DOMEX 700 MPa sendo assim ocorre a ruptura do mesmo. O ensaio de dobramento apresentou boa deformação plástica sem a presença de descontinuidades na solda. The objective of this work is to analyze the weldability of DOMEX 700MPa steel, with the use of the ER70S-6 consumable through the GMAW process, used in the manufacture of truck chassis and trailers. The analysis was performed through mechanical tests performed by speciments in the laboratory, through tensile, bending and micro hardness tests. In the results analyzed, it was verified that the mechanical strength and micro hardness of the addition metal ER70S-6 is lower than that of the base metal Domex Steel 700 MPa, so the rupture of the same occurs. The bending test showed good plastic deformation without the presence of discontinuities in the weld. |
Description: | Artigo publicado no evento: "III SITEFA (Simpósio de Tecnologia da Fatec Sertãozinho)" |
URI: | https://ric.cps.sp.gov.br/handle/123456789/35603 |
Appears in Collections: | Trabalhos de Conclusão de Curso |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
mecanica_2021_daniel_batista_de_oliveira_soldabilidade_em_aço_domex_700mc.pdf Restricted Access | 7.34 MB | Adobe PDF | View/Open Request a copy |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.