Please use this identifier to cite or link to this item:
https://ric.cps.sp.gov.br/handle/123456789/35091
Title: | Efeito da temperatura de recozimento sobre a microestrutura do aço hipereutetóide |
Other Titles: | Effect of annealing temperature on the microstructure of hypereutectoid steel |
Authors: | SILVA, Rafael França e SILVA, João Arthur Nacamura Rodrigues da |
Advisor: | MALUF, Omar |
Other contributor: | MALUF, Omar ANGELONI, Mauricio BOSQUETTI, Péricles |
type of document: | Monografia |
Keywords: | Mecânica;Tratamento térmico;Recozimento;Aço |
Issue Date: | 2015 |
Publisher: | 176 |
Citation: | SILVA, Rafael França e; SILVA, João Arthur Nacamura Rodrigues da. Efeito da temperatura de recozimento sobre a microestrutura do aço hipereutetóide. 2015. Monografia (Curso Superior de Tecnologia em Mecânica: Processos de Soldagem) - Faculdade de Tecnologia de Sertãozinho "Dep. Waldyr Alceu Trigo", Sertãozinho, 2015. |
Abstract: | Este trabalho teve por objetivo estudar as modificações microestruturais e o efeito destas sobre as propriedades mecânicas de um aço hipereutetóide quando submetido a tratamento térmico de normalização e recozimento pleno em diferentes temperaturas. Para este estudo, todas as amostras, transformadas em corpos de prova, passaram por tratamento térmico de normalização e, em seguida, por recozimento pleno, parte delas a 750°C, como recomendado pela melhor técnica, e a outra metade a 850°, para checar se realmente, como previsto, aconteceria uma perda de propriedades mecânicas com o aumento da temperatura de tratamento. Em seguida, os corpos de prova foram analisados por metalografia óptica e ensaiados em tração, impacto e dureza, e os resultados obtidos do material, nas três condições de tratamento, comparados. Observou-se que as modificações microestruturais observadas foram bastante sensíveis. O aço hipereutetóide na condição normalizado e recozido na temperatura mais baixa, não apresentou, claramente, a rede continua de cementita nos contornos de grão de perlita ao contrário daquele tratado a 850°C. O efeito deletério desta rede fica claro quando se observam os menores valores de absorção de energia de impacto, alongamento e redução de área, indicando que o material, conforme previsto, foi fragilizado. Outro aspecto observado foi que os tamanhos dos grãos do aço hipereutetóide, recozido em temperatura não recomendada, ficaram, comparativamente, muito maiores, resultando em menores durezas, limites de resistência à tração e limites de escoamento. Desta maneira, o objetivo que foi comprovar que a temperatura de recozimento para aços hipereutetódes deve ser próxima da temperatura de transformação austenitica, foi atingido. This work aimed to study the microstructural changes and their effect on the mechanical properties of a hipereutetóide steel when subjected to heat treatment and full normalization annealing at different temperatures. For this study, all samples, turned into specimens, have undergone heat treatment standards and then by full annealing of them to 750°C, as recommended by the best technique and the other half to the 850th, to see if indeed, as expected, take place a loss of mechanical properties with increasing treatment temperature. Then the samples were analyzed by optical metallography and tested for strength, impact and hardness, and the results of the material in the three treatment conditions were compared. It was noted that the observed microstructural changes were quite sensitive. Hipereutetóide steel in the normalized condition and annealed at lower temperature did not show clearly the network continues cementite in pearlite grain boundaries unlike that treated to 850 C. The deleterious effect of this network becomes clear when one observes the lowest values of impact energy absorption, elongation and reduction of area, indicating that the material, as expected, was weakened. Another finding was that the sizes of the grains hipereutetóide steel, annealed at temperature not recommended, were comparatively much higher, resulting in lower hardness, tensile strength limits and limits flow. Thus, the goal was to prove that the annealing temperature should be close hipereutetódes steels of the austenitic transformation temperature has been reached. |
URI: | https://ric.cps.sp.gov.br/handle/123456789/35091 |
Appears in Collections: | Trabalhos de Conclusão de Curso |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
mecanica_2015_rafael_franca_e_silva_efeito_da_temperatura_de_recozimento.pdf Restricted Access | 12.73 MB | Adobe PDF | View/Open Request a copy |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.